Quick Guide to Fix Netgear Extender Keeps Disconnecting Issue

In spite of the fact that the Netgear extender is the most reliable means to provide high-speed internet to every room in the house, it still has the same technical issues that plague all other WiFi range extenders. The Netgear extender keeps disconnecting is the most often reported problem. It persists despite your best efforts to resolve it, and it’s affecting your ability to do things like use the internet via Netgear_ext, download files, watch videos, play games, etc. In case you’re facing the same issue, then you will be glad to know that we have compiled some steps you may implement. So, let’s get things moving.

Why Does Netgear Extender Keep Disconnecting?

Considering your Netgear extender keeps dropping connection, here are the possible causes of why that is happening:

• You have not placed your wireless range extender at the right location.
• By chance, you might have installed an outdated firmware update.
• You might be accessing the wrong WiFi network.
• Your Netgear extender has not been set up properly.

[Fixed] Netgear Extender Keeps Disconnecting Issue

The hacks listed below are guaranteed to fix the extender keeps disconnecting issue:

1. Access the Right WiFi Network

Once you’ve set up your WiFi range extender using the 192.168.1.250 default IP address, you’ll have access to a whole new, larger network. The new, larger network goes under a different moniker than its predecessor.

More often than not, you have made all your devices access the old network rather than the new one. You may have wireless connectivity problems if you connect your devices to a network other than the one you want to use. If you want to avoid any problems, you should only access the correct WiFi network.

2. Relocate the Netgear Extender

An intermittent internet connection may be caused by a number of factors, including the incorrect positioning of your Netgear wireless range extender. Keep the following points in mind while changing the location of the device:

• Place the extender in a clean location.
• The extender has to be put in a location that is free from transmitting appliances such as refrigerators, microwaves, security systems, and Bluetooth devices.
• Avoid placing the extender near any moving parts, such as ceiling fans, aquariums, glass, mirrors, concrete, metal, or aluminium.
• Also, do not keep the device in tight spaces like corners or under cabinets.

Now, check if you are still experiencing the Netgear extender keeps disconnecting issue. If yes, then follow the next troubleshooting hack.

3. Reboot the Netgear Extender

A simple power cycle may sometimes fix complex technological problems. Here’s how to reboot your Netgear WiFi range extender:

• Turn off your extender by pressing its power button.
• You need to unplug it and remove any cables attached to it.
• Hold on a moment.
• After that, reconnect your Netgear extender to the wall outlet.
• Now, turn on your WiFi extender and go online.

Are you still not able to get your Netgear extender back on your track? That is not good.

4. Perform Netgear Firmware Update

Do none of the aforementioned solutions help you fix the issue that you were having time because of? If that’s the case, your extender’s firmware is likely out of date.

Therefore, immediately follow the steps below to upgrade the firmware of your extender:

• Turn on the Netgear WiFi extender.
• Please boot up your PC or laptop now.
• Launch your browser and go to the www.mywifiext.net website.
• Log in to your extender.
• The Firmware Update button must be clicked.
• Follow the on-screen instructions to upgrade the firmware on your extender.

In Conclusion

These were some simple solutions to resolve the Netgear Nighthawk extender keeps disconnecting issue. By any chance that you are having a tough time because of the same issue, try to bring your extender close to your router. That might help you out.

Read more- 5 Tips to Troubleshoot Netgear WiFi Extender Problems